Program_Register (NAND) Register Description
| Register Name | Program_Register |
|---|
| Offset Address | 0x0000000010 |
|---|
| Absolute Address |
0x00FF100010 (NAND)
|
|---|
| Width | 32 |
|---|
| Type | mixedMixed types. See bit-field details. |
|---|
| Reset Value | 0x00000000 |
|---|
| Description | Initiate Controller Operations. |
|---|
0: no initiation. 1: Initiate a command or operation. Note: Change values in this register only when controller is not communicating with the memory device.
Program_Register (NAND) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|
| Reserved | 31:27 | razRead as zero | 0x0 | reserved |
| ODT_configure | 26 | rwNormal read/write | 0x0 | ODT Configure operation. |
| Volume_select | 25 | rwNormal read/write | 0x0 | Volume select operation. |
| pgm_pg_reg_clr | 24 | rwNormal read/write | 0x0 | Enhanced program page register clear operation to the selected LUN. |
| reset_lun | 23 | rwNormal read/write | 0x0 | Reset operation to the selected LUN. |
| change_row_addr_end | 22 | rwNormal read/write | 0x0 | Finish the Change row address Command. |
| change_row_addr | 21 | rwNormal read/write | 0x0 | Change row address Operation. |
| Small_data_move | 20 | rwNormal read/write | 0x0 | Small Data Move Operation. |
| Read_Cache_End | 19 | rwNormal read/write | 0x0 | Read Cache End Operation. |
| Read_Cache_Random | 18 | rwNormal read/write | 0x0 | Read Cache Random Operation. |
| Read_Cache_Sequential | 17 | rwNormal read/write | 0x0 | Read Cache Sequential Operation. |
| Read_Cache_Start | 16 | rwNormal read/write | 0x0 | Read Operation. |
| Copy_Back_Interleaved | 15 | rwNormal read/write | 0x0 | Copy back Interleaved Operation. |
| Change_Read_column_Enhanced | 14 | rwNormal read/write | 0x0 | Change read column Enhanced command. |
| Read_Interleaved | 13 | rwNormal read/write | 0x0 | Read Interleaved Operation. |
| Read_Status_Enhanced | 12 | rwNormal read/write | 0x0 | Read status enhanced command. |
| Read_Unique_ID | 11 | rwNormal read/write | 0x0 | read_unique_id command. |
| Set_Features | 10 | rwNormal read/write | 0x0 | Set_feature command and set the timing mode. |
| Get_features | 9 | rwNormal read/write | 0x0 | Get feature command and get the device current timing mode. |
| Reset | 8 | rwNormal read/write | 0x0 | Reset operation with Flash device. |
| Read_Parameter_Page | 7 | rwNormal read/write | 0x0 | Read Parameter page Operation. |
| Read_ID | 6 | rwNormal read/write | 0x0 | Read ID command and read Device ID. |
| Multi_die_rd | 5 | rwNormal read/write | 0x0 | Read operation during multi die. |
| Page_Program | 4 | rwNormal read/write | 0x0 | Page Program with Flash device. |
| Read_Status | 3 | rwNormal read/write | 0x0 | Read status command with Flash device. |
| Block_Erase | 2 | rwNormal read/write | 0x0 | Block Erase operation with Flash device. |
| Multi_die | 1 | rwNormal read/write | 0x0 | Multi die operation (page program, read, block erase). |
| Read | 0 | rwNormal read/write | 0x0 | Memory Read Operation. |