IOU_AXI_RPRTCN (IOU_SECURE_SLCR) Register

Zynq UltraScale+ Devices Register Reference (UG1087)

Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

IOU_AXI_RPRTCN (IOU_SECURE_SLCR) Register Description

Register NameIOU_AXI_RPRTCN
Offset Address0x0000000004
Absolute Address 0x00FF240004 (IOU_SECURE_SLCR)
Width32
TypemixedMixed types. See bit-field details.
Reset Value0x00000000
DescriptionAXI read protection type selection

IOU_AXI_RPRTCN (IOU_SECURE_SLCR) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
Reserved31:25razRead as zero0x0Reserved. Writes are ignored, read data is zero.
NAND_AXI_ARPROT24:22rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access
SD1_AXI_ARPROT21:19rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access
SD0_AXI_ARPROT18:16rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access
Reserved15:12razRead as zero0x0Reserved. Writes are ignored, read data is zero.
GEM3_AXI_ARPROT11:9rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access
GEM2_AXI_ARPROT 8:6rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access
GEM1_AXI_ARPROT 5:3rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access
GEM0_AXI_ARPROT 2:0rwNormal read/write0x0AXI protection
[0] = 0: Normal access
[0] = 1: Previleged access
[1] = 0: Secure access
[1] = 1: No secure access
[2] = 0: Data access
[2] = 1: Instruction access