reg_ForceEventforAUTOCMDErrorStatus (SDIO) Register - reg_ForceEventforAUTOCMDErrorStatus (SDIO) Register - UG1087

Zynq UltraScale+ Devices Register Reference (UG1087)
Document ID
UG1087
Release Date
2025-06-20
Revision
1.11

reg_ForceEventforAUTOCMDErrorStatus (SDIO) Register Description

Register Namereg_ForceEventforAUTOCMDErrorStatus
Offset Address0x0000000050
Absolute Address 0x00FF160050 (SD0)
0x00FF170050 (SD1)
Width16
TypewoWrite-only
Reset Value0x00000000
DescriptionGenerate Auto CMD Error Status Interrupts, write-only.

Write-only. 1: Interrupt is generated. 0: No Interrupt.

reg_ForceEventforAUTOCMDErrorStatus (SDIO) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
forcecmdnotissuedbyautocmd12err 7woWrite-only0x0Force Event for Command Not Issued by AUTO CMD12 Error.
forceautocmdindexerr 4woWrite-only0x0Force Event for AUTO CMD Index Error.
forceautocmdendbiterr 3woWrite-only0x0Force Event for AUTO CMD End Bit Error.
forceautocmdcrcerr 2woWrite-only0x0Force Event for AUTO CMD Timeout Error.
forceautocmdtimeouterr 1woWrite-only0x0Force Event for AUTO CMD Timeout Error.
forceautocmdnotexec 0woWrite-only0x0Force Event for AUTO CMD12 Not Executed.