ERROR_POR_EN_1 (PMU_GLOBAL) Register - UG1087

Zynq UltraScale+ Devices Register Reference (UG1087)
Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

ERROR_POR_EN_1 (PMU_GLOBAL) Register Description

Register NameERROR_POR_EN_1
Offset Address0x0000000554
Absolute Address 0x00FFD80554 (PMU_GLOBAL)
Width32
TypewoWrite-only
Reset Value0x00000000
DescriptionSystem Errors to POR; Interrupt Enable, Reg 1.

0: no effect. 1: enable interrupt (sets mask = 0). Write-only. For details on the bit fields, refer to the ERROR_STATUS_1 register description.

ERROR_POR_EN_1 (PMU_GLOBAL) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
CSU_SWDT27woWrite-only0x0CSU_SWDT timeout. Bit is reset only by the PS_POR_B reset signal pin.
CLK_MON26woWrite-only0x0Clock Monitor (ClkMon). Bit is reset only by the PS_POR_B reset signal pin.
XMPU25:24woWrite-only0x0XMPU and XPPU error signals.
PWR_SUPPLY23:16woWrite-only0x0Eight (8) PS VCC and VCCO power supplies.
Reserved15:14woWrite-only0x0reserved
FPD_SWDT13woWrite-only0x0FPD_SWDT timeout.
LPD_SWDT12woWrite-only0x0LPD_SWDT timeout.
Reserved11:10woWrite-only0x0reserved
RPU_CCF 9woWrite-only0x0RPU common cause failures.
Reserved 8woWrite-only0x0reserved
RPU_LS 7:6woWrite-only0x0RPU lockstep error.
FPD_TEMP 5woWrite-only0x0FPD over tempurature alarm.
LPD_TEMP 4woWrite-only0x0LPD over tempurature alarm.
RPU1 3woWrite-only0x0RPU1 RAM (all ECC errors).
RPU0 2woWrite-only0x0RPU0 RAM (all ECC errors).
OCM_ECC 1woWrite-only0x0OCM (uncorrectable only).
DDR_ECC 0woWrite-only0x0DDR (uncorrectable only).