APERPERM_387 (XPPU) Register

Zynq UltraScale+ Devices Register Reference (UG1087)

Document ID
UG1087
Release Date
2024-03-13
Revision
1.10

APERPERM_387 (XPPU) Register Description

Register NameAPERPERM_387
Offset Address0x000000160C
Absolute Address 0x00FF98160C (LPD_XPPU)
Width32
TypemixedMixed types. See bit-field details.
Reset Value0x00000000
DescriptionAperture 387. IOP Mem 1MB
at 0xFE30_0000.

Refer to APERPERM_384 register for more information.

APERPERM_387 (XPPU) Register Bit-Field Summary

Field NameBitsTypeReset ValueDescription
PARITY31:28rwNormal read/write0Parity for bits in this register.
Bit 28: [4:0].
Bit 29: [9:5].
Bit 30: [14:10].
Bit 31: [27], [19:15].
Note: Software calculates and writes these bits.
TRUSTZONE27rwNormal read/write0Security status requirement per TrustZone.
0: secure master only.
1: secure or non-secure master okay.
Reserved26:20roRead-only0x0reserved
PERMISSION19:0rwNormal read/write0Master ID Profile Permission. Each permission bit [19:0] corresponds to a MASTER_IDxx register. To allow a master to access this aperture, set the corresponding bit.
0: not allowed.
1: allowed.
More than one bit can be set to permit more than one master to access the aperture.