SUPPLYn_TH_LOWER (PMC_SYSMON_CSR) Register Description
Register Name | SUPPLYn_TH_LOWER |
---|---|
Relative Address | 0x0000001980 |
Absolute Address | 0x00F1271980 (PMC_SYSMON_CSR) |
Width | 32 |
Type | mixedMixed types. See bit-field details. |
Reset Value | 0x00000000 |
Description | 160 Lower Threshold Voltage Alarm Registers for Supplies 0 to 159 |
SUPPLYn_TH_LOWER (PMC_SYSMON_CSR) Register Bit-Field Summary
Field Name | Bits | Type | Reset Value | Description |
---|---|---|---|---|
Reserved | 31:19 | razRead as zero | 0x0 | |
val_ro | 18:16 | roRead-only | 0x0 | Power supply threshold format: 00x: Supply, exponent = -15 01x: Unipolar mode, expondent = -16 10x: Bipolar mode, exponent = -16 11x: Supply extened mode, exponent = -14 xx1: Signed xx0: Unsigned Note: This is a read-only bit field. |
val | 15:0 | rwNormal read/write | 0x0 | When a SUPPLYn meaurement is less than the [val] bit field and the alarm is enabled by a bit in the ALARM_REGx (0 to 4) register, then: * The associated bit in the ALARM_FLAGx (0 to 4) register will be set = 1 * The output port alarm [n/32] will be set = 1 * The ISR.ALARM [n/32] will be set * An interrupt may be generated. Note: Additionally a PMBus undervoltage fault will be indicated and an SMBALERT may be generated. Format: Modified floating point when concatenated {val_ro, val}, signed or unsigned. |