PL_DISABLE_AUTO_SPEED_CHANGE_TO_GEN2 (CPM5_PCIE_ATTR) Register Description
Register Name | PL_DISABLE_AUTO_SPEED_CHANGE_TO_GEN2 |
---|---|
Relative Address | 0x00000001D0 |
Absolute Address |
0x00FCE081D0 (CPM5_PCIE0_ATTR) 0x00FCE881D0 (CPM5_PCIE1_ATTR) |
Width | 32 |
Type | rwNormal read/write |
Reset Value | 0x00000000 |
Description | Downstream Port Auto Speed Change to Gen2: When FALSE enable Downstream Port to autonomously change speed to Gen2. When TRUE will require software to issue "link retrain". Usually set to TRUE only to overcome VIP modelling limitations. |
This register should only be written to during reset of the PCIe block
PL_DISABLE_AUTO_SPEED_CHANGE_TO_GEN2 (CPM5_PCIE_ATTR) Register Bit-Field Summary
Field Name | Bits | Type | Reset Value | Description |
---|---|---|---|---|
attr | 0 | rwNormal read/write | 0x0 | Downstream Port Auto Speed Change to Gen2: When FALSE enable Downstream Port to autonomously change speed to Gen2. When TRUE will require software to issue "link retrain". Usually set to TRUE only to overcome VIP modelling limitations. |