There are three SoC endpoint system-level resets (SYS_RST) routed to the NPI register modules in the SoC where one or more of these resets can be enabled (unmasked) to reset the associated block. The SYS_RST reset signals are controlled by three bits in the CRP. RST_NONPS register as shown in the following table. Each NPI-based PCSR register set includes a register with three mask bits for the three SYS_RST reset signals from the PMC reset controller.
Note: These resets do not have an effect on the CRP.RESET_REASON
register.
Reset Signal Name | CRP. RST_NONPS Bit Name | Description |
---|---|---|
SYS_RST_1 |
[SYS_RST_1] |
System reset 1 bused to NPI register modules |
SYS_RST_2 |
[SYS_RST_2] |
System reset 2 bused to NPI register modules |
SYS_RST_3 |
[SYS_RST_3] |
System reset 2 bused to NPI register modules |