Done Interrupt Accounting

Versal Adaptive SoC Technical Reference Manual (AM011)

Document ID
Release Date
1.6 English
Note: The DMA channel does not update descriptors in memory.

When the controller is finished processing a descriptor table, it generates a SRC/DST done interrupt and updates the interrupt count register. Each channel includes the following scheme on both the SRC and DST sides.

  • The software can selectively request a completion interrupt on descriptors. After a descriptor is processed, the DMA increments the interrupt count register.
  • A SRC descriptor done interrupt is generated after the DMA is done reading all the data corresponding to the source buffer descriptor. The SRC descriptor done interrupt does not guarantee that data is written at a destination location. Data can still be in a shared common buffer.
  • A DST descriptor done interrupt is generated after the DMA channel receives a response to the last AXI write of the buffer corresponding to the DMA buffer descriptor. The DST done interrupt ensures that data has been written to the memory location.

An interrupt is generated to the software as soon as the interrupt accounting’s count transitions to non-zero. When the software takes this interrupt, it should also read the interrupt accountings register. Count provides the number of processed descriptors with interrupt enabled. This counter is cleared on read (due to coherency). This scheme eliminates the need for a timeout mechanism. It also provides flexibility to the software to enable an interrupt on a required descriptor.

The DMA channel implements a separate 32-bit interrupt account counter for the source and destination sides. If the software does not read/clear the counter for a long time, this counter can overflow. The DMA generates an interrupt to indicate the overflow condition on the interrupt accounting counter. If a counter over flows on the last descriptor of a DMA transfer (DMA DONE), the interrupt accounting counter overflow interrupt is generated.