SPI Clocks

Versal Adaptive SoC Technical Reference Manual (AM011)

Document ID
Release Date
1.6 English

There are three clocks associated with an SPI controller.

  • SPIx_REF_CLK controller reference clock
  • LPD_LSBUS_CLK for the APB programming interface
  • SPIx_SCLK on SPI bus
Note: The SPI clock frequency guidelines are included in the I/O Peripheral Clock Frequency Requirements section.

Reference Clock

Each controller is provided a SPIx_REF_CLK from the LPD clock controller. This clock is used by the majority of the controller logic. Reference clocks are programmed by the LPD clock controller using the CRL SPIx_REF_CTRL registers.

I/O SCLK Clock

The I/O SCLK is generated by dividing down the SPI_REF_CLK using the Config [BAUD_RATE_DIV] bit field. The divide-down ratio options include /4, /8, /16, …, /256.

APB Programming Interface Clock

The controller is also clocked by the LPD_LSBUS_CLK for the APB programming interface. This clock is common to all LPD controllers on the IOP switch and is controlled by the CRL LPD_LSBUS_CTRL register.