The UART system-level control registers (SLCR) are listed in the following table. The base address for the SLCR registers:
- LPD_IOP_SLCR register module is
0xFF08_0000. - PMC_IOP_SLCR register module is
0xF106_0000(for PMC MIO).
| Register Name | Bit Field | Offset Address | Access Type | Description |
|---|---|---|---|---|
| LPD_IOP_SLCR APB Programming Interface Access Error Interrupt | ||||
|
[perr_uart0_apb] |
0x0714+ |
W1C, R |
Parity error detected on APB programming interface write data | |
| LPD_IOP_SLCR MIO Select | ||||
|
[UART0_SEL] |
|
RW | Select between PMC and LPD MIO muxes | |
| LPD_IOP_SLCR MIO Pin Routing | ||||
|
|
[L0_SEL} |
0x000+ |
RW | LPD mux MIO routing |
| PMC_IOP_SLCR MIO Pin Routing | ||||
|
|
[L0_SEL} |
0x000+ |
RW | PMC mux MIO routing |