High-speed Clock Control Settings

Versal Adaptive SoC Technical Reference Manual (AM011)

Document ID
Release Date
1.6 English

The clock control and status bits are listed in the following table.

Table 1. High-speed Clock Control Settings
SD_EMMC Register Field Name, Bits Setting Description
Clock Controls

[SDClkFreqDiv_U, 7:6]
[SDClkFreqDiv_L, 15:8]

Note 1 Clock frequency divider
[IntClkEn, 0] 1 TX output enable
[SDClkEn, 2] 0 Clock enable
Clock Status
CLK_CTRL [IntClkStable, 1] 1

0: Not ready
1: Ready

DLL Clock Controls
[sel, 5:0] Note 2 Output tap delay select
[sel, 7:0] Note 2 Input tap delay select
  1. Set these bits based on the required frequency of the SDx_REF_CLK and SDx_CLK. See Clock Frequency Divider Register Settings. For frequencies above 25 MHz, the SDx_REF_CLK is set to 200 MHz.
  2. These values are used to manually tune the DLL clock phases RX. See DLL Programming Model.