The IPI interrupt channels and message buffers are pre-defined and software associated as described in Table: IPI Channel and Message Buffer Default Associations.
Note: The software might reassign the interr/upt channels and message buffers except for the PMU interrupts.
Channel Number |
Default Owner |
IPI Interrupt Registers |
IPI Message Buffers |
||||
---|---|---|---|---|---|---|---|
Name |
Base Address |
XPPU 64 KB Aperture |
SI Agent Number |
Base Address |
XPPU 32B Apertures |
||
Channel 0 |
APU |
Channel0 |
0xFF30_0000 |
048 |
1 |
0xFF99_0400 |
256 - 271 |
Channel 1 |
RPU0 |
Channel1 |
0xFF31_0000 |
049 |
2 |
0xFF99-0000 |
272 - 287 |
Channel 2 |
RPU1 |
Channel2 |
0xFF32_0000 |
050 |
3 |
0xFF99_0200 |
288 - 303 |
Channel 3 |
PMU(1) |
PMU_0(2) |
0xFF33_0000 |
051 |
8 |
0xFF99_0E00 |
368 - 383 |
Channel 4 |
PMU_1 |
0xFF33_1000 |
|||||
Channel 5 |
PMU_2 |
0xFF33_2000 |
|||||
Channel 6 |
PMU_3 |
0xFF33_3000 |
|||||
Channel 7 |
PL 0 |
Channel7 |
0xFF34_0000 |
052 |
4 |
0xFF99_0600 |
304 - 319 |
Channel 8 |
PL 1 |
Channel8 |
0xFF35_0000 |
053 |
5 |
0xFF99_0800 |
320 - 335 |
Channel 9 |
PL 2 |
Channel9 |
0xFF36_0000 |
054 |
6 |
0xFF99_0A00 |
336 - 351 |
Channel 10 |
PL 3 |
Channel10 |
0xFF37_0000 |
055 |
7 |
0xFF99_0C00 |
352 - 367 |
Notes: 1.The PMU interrupts are hardwired because the PMU IRQ signals only go to the PMU interrupt. 2.The PMI IPI0 interrupt causes the PMU to enter sleep mode. |