Accessible from EL1 modes, except that non-secure software executing at EL2 controls access from non-secure EL1 modes.
When access from EL1 modes is permitted, CNTKCTL.EL0PTEN determines whether the registers are accessible from EL0 modes. If an access is not permitted because CNTKCTL.EL0PTEN is set to 0, an attempted access from EL0 is UNDEFINED.
The following describes the EL1 physical timer.
•Except for accesses from the monitor mode, accesses are to the registers in the current security state.
•For accesses from monitor mode, the value of SCR_EL3.NS determines whether accesses are to the secure or the non-secure registers.
•The non-secure registers are accessible from hypervisor mode.
•CNTHCTL.NSEL1TPEN determines whether the non-secure registers are accessible from non-secure EL1 modes. If this bit is set to 1, to enable access from non-secure EL1 modes CNTKCTL.EL0PTEN determines whether the registers are accessible from non-secure EL0 modes.
If an access is not permitted because CNTHCTL.NSEL1TPEN is set to 0, an attempted access from a non-secure EL1 or EL0 mode generates a hypervisor trap exception. However, if CNTKCTL.EL0PTEN is set to 0, this control takes priority, and an attempted access from EL0 is UNDEFINED.