•Tile oriented °Four RF-ADCs and one PLL per tile °12-bit resolution °Implemented as either 4 channels of 2.058 GSPS, or 2 channels of 4.096 GSPS (device dependent) •Decimation filters °1x, 2x, 4x, 8x °Full bandwidth data-rate support °80% pass band, 89dB stop-band attenuation •Mixer °Full complex mixers °48-bit NCO per RF-ADC °Fixed Fs/4, Fs/2 low-power mode •Single/multiband flexibility °2x bands per 2.058 GSPS RF-ADC pair °Can be configured for real or imaginary (I/Q) inputs •Signal amplitude threshold °Two programmable flags per RF-ADC •Quadrature modulator correction °Gain/phase/offset correction per RF-ADC pair •Multi-chip synchronization •Flexible interconnect logic interface °N words x frequency selection •RF-DAC Features °Tile oriented °Four RF-DACs and one PLL per tile °14-bit resolution °Sampling speed 6.554 GSPS per RF-DAC °4GHz full power output bandwidth •Interpolation °1x, 2x, 4x, 8x °Full bandwidth data rate support °80% pass band, 89 dB stop band attenuation •Mixing °Full complex mixers °48-bit NCO per RF-DAC °Fixed Fs/4, Fs/2 low-power mode °1st/2nd Nyquist zone RF-DAC operation support •Single/multiband flexibility °2x bands per RF-DAC pair °Can be configured for real or imaginary (I/Q) outputs •Quadrature modulator correction °Gain/phase/offset correction per RF-DAC pair •Sinx/x correction •Sample delay correction •Multi-chip synchronization •Flexible interconnect logic interface °N words x frequency selection See the Zynq UltraScale+ RFSoC RF Data Converter LogiCORE IP Product Guide (PG269) [Ref 26] for more information.