Low-Rate Sampling

Zynq UltraScale+ Device Technical Reference Manual (UG1085)

Document ID
Release Date
2.4 English

Channels that are less time critical can be sampled less often to free up ADC bandwidth for other channels. The SEQ_LOW_RATE_CHANNEL registers are used to select which channels are sampled at a lower rate than the others. The CONFIG_REG4 [sequence_rate] specifies how often the low-rate channels are sampled (every 4th, 16th, and 64th sequence). Selecting a channel in both the SEQ_CHANNEL and SEQ_LOW_RATE_CHANNEL registers causes the SEQ_CHANNEL to prevail, but this situation is not recommended. The low-rate sampling feature applies to both the PL and PS SYSMON units.