REG_ERR_LOG_REQ_P0_1ST_ERR_NUM (NOC_NPS4) Register Description
| Register Name | REG_ERR_LOG_REQ_P0_1ST_ERR_NUM |
|---|---|
| Offset Address | 0x0000000284 |
| Absolute Address |
This register description shows register offset addresses relative to the base address of the module. Base addresses vary from one device to another. To determine the correct base address for any device, refer to support.xilinx.com/s/article/00003507. |
| Width | 32 |
| Type | roRead-only |
| Reset Value | 0x00000030 |
| Description | Port0 Error Reference Number; this register must be read 1st before reading port0 error info registers |
REG_ERR_LOG_REQ_P0_1ST_ERR_NUM (NOC_NPS4) Register Bit-Field Summary
| Field Name | Bits | Type | Reset Value | Description |
|---|---|---|---|---|
| etyp | 21:20 | roRead-only | 0x0 | Error Type: 0: no distinction between read or write 1: Write 2: Read |
| enumb | 19:16 | roRead-only | 0x0 | Sub-category error number |
| subc1 | 15:12 | roRead-only | 0x0 | Sub-category 1 number |
| subc0 | 11:8 | roRead-only | 0x0 | Sub-category 0 number |
| comp | 7:4 | roRead-only | 0x3 | Component number: NMU =1, NSU=2, NPS=3 |
| categ | 3:0 | roRead-only | 0x0 | Category number |