REG_ERR_LOG_P1_INFO_2 (NOC_NPS) Register Description
Register Name | REG_ERR_LOG_P1_INFO_2 |
---|---|
Offset Address | 0x0000000460 |
Absolute Address |
This register description shows register offset addresses relative to the base address of the module. Base addresses vary from one device to another. To determine the correct base address for any device, refer to support.xilinx.com/s/article/00003507. |
Width | 32 |
Type | roRead-only |
Reset Value | 0x00000000 |
Description | Port1 Error Log information part2; this register must be read 1st before reading port2 error info registers |
REG_ERR_LOG_P1_INFO_2 (NOC_NPS) Register Bit-Field Summary
Field Name | Bits | Type | Reset Value | Description |
---|---|---|---|---|
poison | 9 | roRead-only | 0x0 | Flit poison |
vc | 7:0 | roRead-only | 0x0 | Virtual channel (VC) on which error is detected. The VC repported is incorrect and should not be relied on as the VC on which the error was detected. SRC ID should be used to infer the VC |