Transceiver files for 7 series and
Zynq 7000 devices can be generated using
transceiver wizards by generating the GT Wizard IP using the following configuration:
- For BASE-X or SGMII without fabric elastic buffer mode
- Select the Protocol as gigabit ethernet CC and generate the GT Wizard IP. For 2.5G data rates select the TX and RX line rates to be 3.125 Gbps.
- For SGMII with fabric elastic buffer/ Dynamic Switching modes
- Select Protocol as gigabit ethernet noCC and generate the GT Wizard IP. For 2.5G data rates select the TX and RX line rates to be 3.125 Gbps.
project_dir>/<project_name>/<project_name>.srcs/sources1/ip/<component_name>/synth/transceiver/
- <component_name>_gtwizard_init.v[hd]
- <component_name>_tx_startup_fsm.v[hd]
- <component_name>_gtwizard_multi_gt.v[hd]
- <component_name>_rx_startup_fsm.v[hd]
- <component_name>_gtwizard_gtrxreset_seq.v[hd]
- <component_name>_gtwizard.v[hd]
- <component_name>_gtwizard_gt.v[hd]
- <component_name>_gtwizard_gtp_rxpmarst_seq_vhd.v[hd]
- <component_name>_gtwizard_gtp_rxrate_seq.v[hd]