- GT TYPE (GT_Type)
- Selects the type of transceiver (GTH/GTY). Applicable only for UltraScale and AMD UltraScale+™ devices with GTH and GTY transceivers. This option is enabled only forAMD UltraScale+™ /AMD UltraScale™ devices. For AMD Versal™ Devices, GTY or GTYP is automatically assigned based on the device.
Valid Values: GTH (Default) and GTY
- Reference Clock Frequency (MHz)
- This specifies the GT reference clock rate. Valid values are selected in the drop-down menu.
- Transceiver Location
- This specifies the GT Location. Valid values are selected in the drop-down menu.
- DRP Clock Frequency
-
drpclock
and independent clock frequency.- If the Transceiver Control and status is enabled, this corresponds to the DRP clock input. It is recommended to connect the independent clock to the same clock frequency.
- If the Transceiver Control and status is disabled this corresponds to the independent clock.
Valid values:
- 6.25-62.5 MHz (MaxDataRate is 1G)
- 6.25-156.25 MHz (MaxDataRate is 2_5G)
- LVDS Reference Clock Frequency
- This specifies the reference clock frequency for the synchronous SGMII LVDS solution. Valid values are selected through the drop-down menu. Applicable only for AMD UltraScale™ devices.