Byte-Wide Write Enable—NO_CHANGE Mode (Verilog) - 2024.2 English - 2024.1 English

Vivado Design Suite User Guide: Synthesis (UG901)

Document ID
UG901
Release Date
2024-11-13
Version
2024.2 English

Filename: bytewrite_tdp_ram_nc.v

//
// True-Dual-Port BRAM with Byte-wide Write Enable
// No-Change mode
//
// bytewrite_tdp_ram_nc.v
//
// ByteWide Write Enable, - NO_CHANGE mode template - Vivado recomended
module bytewrite_tdp_ram_nc
#(
//---------------------------------------------------------------
parameter NUM_COL = 4,
parameter COL_WIDTH = 8,
parameter ADDR_WIDTH = 10, // Addr Width in bits : 2**ADDR_WIDTH = RAM Depth
parameter DATA_WIDTH = NUM_COL*COL_WIDTH // Data Width in bits
//---------------------------------------------------------------
) (
input clkA,
input enaA,
input [NUM_COL-1:0] weA,
input [ADDR_WIDTH-1:0] addrA,
input [DATA_WIDTH-1:0] dinA,
output reg [DATA_WIDTH-1:0] doutA,

input clkB,
input enaB,
input [NUM_COL-1:0] weB,
input [ADDR_WIDTH-1:0] addrB,
input [DATA_WIDTH-1:0] dinB,
output reg [DATA_WIDTH-1:0] doutB
);


// Core Memory
reg [DATA_WIDTH-1:0] ram_block [(2**ADDR_WIDTH)-1:0];

// Port-A Operation
generate
genvar i;
for(i=0;i<NUM_COL;i=i+1) begin
always @ (posedge clkA) begin
if(enaA) begin
if(weA[i]) begin
ram_block[addrA][i*COL_WIDTH +: COL_WIDTH] <= dinA[i*COL_WIDTH +: COL_WIDTH];
end
end
end
end
endgenerate

always @ (posedge clkA) begin
if(enaA) begin
if (~|weA)
doutA <= ram_block[addrA];
end
end


// Port-B Operation:
generate
for(i=0;i<NUM_COL;i=i+1) begin
always @ (posedge clkB) begin
if(enaB) begin
if(weB[i]) begin
ram_block[addrB][i*COL_WIDTH +: COL_WIDTH] <= dinB[i*COL_WIDTH +: COL_WIDTH];
end
end
end
end
endgenerate

always @ (posedge clkB) begin
if(enaB) begin
if (~|weB)
doutB <= ram_block[addrB];
end
end

endmodule // bytewrite_tdp_ram_nc