EXTRACT_RESET - 2024.1 English

Vivado Design Suite User Guide: Synthesis (UG901)

Document ID
UG901
Release Date
2024-05-30
Version
2024.1 English

EXTRACT_RESET controls if registers infer resets. Typically, the Vivado tools extract or not extract resets based on heuristics that typically benefit the most designs. In cases where Vivado is not behaving in a desired way, this attribute overrides the default behavior of the tool. If an undesired synchronous reset goes to the flip-flop, this attribute can force it to the D input logic. Conversely, if the tool is not inferring a reset specified in the RTL, this attribute can command the tool to move that reset to the dedicated reset of the flop. This attribute can only be used with synchronous resets; asynchronous resets are not supported.

EXTRACT_RESET is placed on the registers and supported in the RTL and XDC. It can take the boolean values: yes or no. A value of no means that the reset does not go to the R pin of the register but is routed through logic to the D pin of the register. A value of yes means that the reset goes directly to the R pin of the register.