LUT_DECOMPOSE - 2024.1 English

Vivado Design Suite Properties Reference Guide (UG912)

Document ID
UG912
Release Date
2024-06-05
Version
2024.1 English

The LUT_DECOMPOSE property lets you reduce design congestion by executing LUT decomposition during logic optimization. The property can reduce interconnect density, and local routing congestion without having much effect on the design performance, but could have a larger impact on the design utilization when too many LUTs are decomposed. You must set LUT_DECOMPOSE to true on the hierarchical or leaf cells where LUT decomposition is desired.

Note: LUT6 and LUT5 cells are targeted for decomposition. When LUT_DECOMPOSE attribute is applied on selected LUT5/LUT6s, the tool tries to decompose them into back-to-back connected smaller LUTs whenever possible. LUTs with timing constraints, DONT_TOUCH, SOFT_HLUTNM, HLUTNM, LUTNM will not be considered for decomposition.
Architecture Support
All Architectures
Applicable Objects
Hierarchical or leaf (LUT5, LUT6) cells (get_cells).
Values
TRUE: Candidate for LUT decomposition.

Syntax

Verilog Syntax
Not Applicable
VHDL Syntax
Not Applicable
XDC Syntax
set_property LUT_DECOMPOSE <TRUE|FALSE> [get_cells <cell(s)>]

Affected Steps

Logic Optimization (Opt Design)