DELAY_VALUE_XPHY - 2024.1 English

Vivado Design Suite Properties Reference Guide (UG912)

Document ID
UG912
Release Date
2024-05-30
Version
2024.1 English

The DELAY_VALUE_XPHY property on PORT objects specifies the amount of delay to add on an input or output path for Versal XPHY Logic Interfaces. During the early phases of opt_design when the Advanced I/O Wizard IP is being regenerated, the DELAY_VALUE_XPHY value will be copied from the PORT onto the XPHY instance for the input or output path. DRCs exist in the Vivado Design Suite to ensure that the DELAY_VALUE_XPHY value aligns to the value on the XPHY instance. In the case where you want to update the amount of delay on an input or output path for an already implemented design, you can apply your new value to the PORT by using the DELAY_VALUE_XPHY property. Then, you can run the implement_xphy_cores -update_delay_value_only command to deposit the new value onto the XPHY instance.

Architecture Support

Versal architecture.

Applicable Objects

Ports (get_ports)

Value
  • For input ports without a cascade: 0 - 625 ps
  • For input ports with a cascade: 0 - 1250 ps
  • For output ports: 0 - 625 ps

Syntax

Verilog Syntax

Not applicable

VHDL Syntax

Not applicable

XDC Syntax
set_property DELAY_VALUE_XPHY <value> [get_ports port_name]

Where port_name is a top-level port.

XDC Example Syntax:

# Open a fully implemented design 
open_checkpoint top_routed.dcp

# Update the delay on the input path from PORT dataIn 
set_property DELAY_VALUE_XPHY 125 [get_ports dataIn] 
implement_xphy_cores -update_delay_value_only

# Write a new checkpoint and device image with the updated delay 
write_checkpoint top_routed_125.dcp
write_device_image top_routed_125.pdi

Affected Steps

  • Timing Analysis
  • Opt Design