DCI_CASCADE - 2024.1 English

Vivado Design Suite Properties Reference Guide (UG912)

Document ID
UG912
Release Date
2024-05-30
Version
2024.1 English

DCI_CASCADE defines a master-slave relationship between a set of high-performance (HP) I/O banks. The digitally controlled impedance (DCI) reference voltage is chained from the master I/O bank to the slave I/O banks.

DCI_CASCADE specifies which adjacent banks use the DCI Cascade feature, thereby sharing reference resistors with a master bank. If several I/O banks in the same I/O bank column are using DCI, and all of those I/O banks use the same VRN/VRP resistor values, the internal VRN and VRP nodes can be cascaded so that only one pair of pins for all of the I/O banks in the entire I/O column is required to be connected to precision resistors. DCI_CASCADE identifies the master bank and all associated slave banks for this feature. Refer to the 7 Series FPGAs SelectIO Resources User Guide (UG471), or the UltraScale Architecture SelectIO Resources User Guide (UG571) for more information.

Architecture Support
  • AMD Kintex™ 7 devices.
  • Kintex UltraScale devices.
  • AMD Virtex™ 7 devices.
  • Virtex UltraScale devices.
  • Larger AMD Zynq™ 7000 SoC devices.
Applicable Objects
  • I/O Bank (get_iobanks)
    • High Performance (HP) bank type
Value
Valid High Performance (HP) bank numbers. See the 7 Series FPGAs Packaging and Pinout Product Specification (UG475), or the UltraScale and UltraScale+ FPGAs Packaging and Pinouts Product Specification (UG575) for more information.

Syntax

Verilog Syntax

Not applicable

VHDL Syntax

Not applicable

XDC Syntax
set_property DCI_CASCADE {slave_banks} [get_iobanks master_bank]

Where

  • slave_banks is a list of the bank numbers of the slave banks.
  • master_bank is the bank number of the designated master bank.

XDC Syntax Example:

# Designate Bank 14 as a master DCI Cascade bank and Banks 15 and 16 as its slaves 
set_property DCI_CASCADE {15 16} [get_iobanks 14]

Affected Steps

  • I/O planning
  • Place Design
  • DRC
  • Write Bitstream
  • report_power