QDMA - 3.4 English - PG346

1. Navigate to driver root directory
   1. $> cd <parent-path>/dma_ip_drivers/QDMA/linux-kernel
2. Compile driver and applications
   1. $> make TANDEM_BOOT_SUPPORTED=1
3. Copy driver and application executables to standard destinations
   1. $> make install
4. Generate the qdma.conf file manually or using the qdma_generate_conf_file.sh script and place it in /etc/modprobe.d if this is the first time using the driver on the host system. It is also recommended to blacklist the driver modules for boot; refer to the README for instructions
5. Insert the driver into the kernel
   1. $> modprobe qdma-pf
6. Set the maximum number of possible queues using sysfs
   1. $> echo 1 > /sys/bus/pcie/devices/0000:01:00.0/qdma/qmax
7. Add the queue; must use memory mapped DMA and direction is host to card
   1. $> dma-ctl qdma01000 q add idx 0 mode mm dir h2c
8. Start the queue; must set aperture size so DMA transfer acts on a keyhole
   1. $> dma-ctl qdma01000 q start idx 0 dir h2c aperture_sz 4096
9. Perform the DMA transfer to SBI
   1. $> dma-to-device -d /dev/qdma01000-MM-0 -f <.pdi file> -s <size> -a 0x102100000