Generic AXI4 Interfaces - 5.0 English - PG118

Only the number of ports specified by C_NUM_GENERIC_PORTS are available. There are no registers to read, but basic functionality is tested by writing data and then reading it back. Output S<x>_AXI_GEN_AWREADY asserts when the write address is used, S<x>_AXI_GEN_WREADY asserts when the write data is used, and output S<x>_AXI_GEN_BVALID asserts when the write response is valid. Output S<x>_AXI_GEN_ARREADY asserts when the read address is used, and output S<x>_AXI_GEN_RVALID asserts when the read data/response is valid. If the interface is unresponsive, ensure that the following conditions are met:

• The ACLK input is connected and toggling.
• The interface is not being held in reset, and ARESETN is an active-Low reset.
• Ensure the accessed generic port is activated.
• If the simulation has been run, verify in simulation and/or an AMD Vivado™ debugging tool capture that the waveform is correct for accessing the AXI4 interface.