Slave Device = Winbond - 3.2 English - PG153

AXI Quad SPI LogiCORE IP Product Guide (PG153)
Document ID
PG153
Release Date
2025-01-21
Version
3.2 English

This is a dedicated mode and supports only Winbond memories as SPI slave devices. Most of the Winbond W25Q64BV memories SPI commands are supported. The following table shows the generalized core behavior.

Table 1. SPI Command Core Behavior for Dual Mode and Winbond Memory
Command Type Winbond Command Error Core Behavior
Standard SPI Supported No Standard format
Standard SPI Not supported Yes No SPI transaction
Dual mode Supported No Dual mode instruction format as given in the data sheet
Dual mode Not supported Yes No SPI transaction
Quad mode Supported No Quad mode instruction format as given in the data sheet
Quad mode Not supported Yes No SPI transaction
  1. The core is designed to support the Winbond W25Q64BV memory. See the device data sheet for the command, address, dummy bytes and data bytes required for each command and for the command, address, and data bits operating details.