Operation - 3.4 English

Versal Adaptive SoC CPM DMA and Bridge Mode for PCI Express Product Guide (PG347)

Document ID
PG347
Release Date
2024-11-22
Version
3.4 English

The memory mapped DMA engines (H2C and C2H) are enabled by setting the run bit in the Memory Mapped Engine Control Register. When the run bit is deasserted, descriptors can be dropped. Any descriptors that have already started the source buffer fetch will continue to be processed. Reassertion of the run bit will result in resetting internal engine state and should only be done when the engine is quiesced. Descriptors are received from either the descriptor engine directly or the Descriptor Bypass Input interface. Any queue that is in internal mode should not be given descriptors through the Descriptor Bypass Input interface. Any descriptor sent to an MM engine that is not running will be dropped. For configurations where a mix of Internal Mode queues and Bypass Mode queues are enabled, round robin arbitration is performed to establish order.

The DMA Memory Mapped engine first generates the read request to the source interface, splitting the descriptor at alignment boundaries specific to the interface. Both PCIe and AXI read interfaces can be configured to split at different alignments. Completion space for read data is preallocated when the read is issued. Likewise for the write requests, the DMA engine will split at appropriate alignments. On the AXI interface each engine will use a single AXI ID. The DMA engine will reorder the read completion/write data to the order in which the reads were issued. Once sufficient read completion data is received the write request will be issued to the destination interface in the same order that the read data was requested. Before the request is retired, the destination interfaces must accept all the write data and provide a completion response. For PCIe the write completion is issued when the write request has been accepted by the transaction layer and will be sent on the link next. For the AXI Memory Mapped interface, the bresp is the completion criteria. Once the completion criteria has been met, the host writeback, interrupt and/or marker response is generated for the descriptor as appropriate.

The DMA Memory Mapped engines also support the no_dma field of the Descriptor Bypass Input, and zero-length DMA. Both cases are treated identically in the engine. The descriptors propagate through the DMA engine as all other descriptors, so descriptor ordering within a queue is still observed. However no DMA read or write requests are generated. The status update (writeback, interrupt, and/or marker response) for zero-length/no_dma descriptors is processed when all previous descriptors have completed their status update checks.