Using a Variant Subsystem - 2024.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2024-05-30
Version
2024.1 English

To use a Variant Subsystem in a design after its variant selections have been implemented, do the following:

  1. Create the variant subsystem and insert it into the design at the appropriate location.

  2. Right-click the variant block and select Block Parameters. The Block Parameters dialog box for the variant block opens.
  3. To select the active Variant based on the evaluation of the Variant conditions, use the expression mode. Otherwise, select label mode. When you select the Variant control mode as label, the Label mode active choice option becomes available. In label mode, Variant control need not be created in the global workspace. You can select an active Variant choice from Label mode active choice options.
  4. Use the options available on the Block Parameter dialog box to add variant controls and corresponding variant conditions.

    The following figure shows an example configuration for expression mode:



  5. To activate a variant selection, type the variant name in the MATLABĀ® command window. For example, type VSS_MODE = 2.
  6. Update the model (Ctrl+D) to ensure that the variant selection has been activated.