Debugging Multiple Clock Domain Signals - 2024.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2024-05-30
Version
2024.1 English

In Vitis Model Composer you can use cross probing between the signal in the AMD Waveform Viewer and the Simulink diagram to aid the debugging process.

To add a signal to the Waveform viewer, right-click the signal in the model and select AMD Add To Viewer. Simulating the design should launch the Waveform Viewer as shown below.

Figure 1. Waveform Viewer

All signals in same clock domain are colored similarly. In the preceding figure: src_domain/Slice/Out1 and dest_domain/Relational/Out1 are in different clock domains.