Plotting AIE Simulation Output Data and Calculating Throughput - 2024.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
UG1483
Release Date
2024-05-30
Version
2024.1 English

Vitis Model Composer provides the capability to log the simulation data and visualize the output of an AI Engine subsystem by integrating the Simulink 'Simulation Data Inspector' feature. It also calculates the throughput for each output port of the AI Engine subsystem. To achieve this, select Plot AIE Simulation output and estimate the throughput from the Hub block. When the AIE simulation completes, the tool automatically brings up the Simulation Data Inspector window reflecting the outputs of the AI Engine subsystem as shown in the following figure.

Figure 1. Simulation Data Inspector

The Simulation Data Inspector displays available data in the Inspect pane. To plot a signal, select the check box next to the signal. You can modify the layout and add different visualizations to analyze the simulation data. You can also get the throughput information for each port from the Inspect pane. You can use cursors to select a region of the plot for the throughput calculation. If required, you can re-open the Simulation Data Inspector from the Simulink® Editor toolbar using the Simulation Data Inspector button.

For more information on using the Simulink® Simulation Data Inspector, visit https://mathworks.com/help/simulink/ug/populate-sdi-with-your-data.html.