Cross Probing from the Resource Analysis Results to the Model - 2024.1 English

Vitis Model Composer User Guide (UG1483)

Document ID
Release Date
2024.1 English

You can cross probe from the Resource Analyzer table to the Simulink® model by clicking a block or subsystem name in the Resource Analyzer table, which highlights the corresponding HDL block or subsystem in the model. The cross probing is useful to identify blocks and subsystems that are implemented using a particular type of resource.

Figure 1. Resource Analyzer

When you cross probe, the following will display in the model:

  • The block you have selected in the table will be highlighted in yellow and outlined in red.
  • If the block or subsystem you have selected in the table is within an upper-level subsystem, then the parent subsystem is highlighted in red in addition to the underlying block.
Figure 2. Selected Subsystem