Open Multiple Profile Runs in the Vitis Analyzer - 2023.2 English

In this section, try to use a different set of metrics in the xrt.ini file and generate another xrt.run_summary file. Open the second run_summary on top of the first summary.

1. Save the profile data obtained from the first run (step 1-3) to a directory profile_0 in your local workspace.

2. Edit the xrt.ini file in SD_card with the following content, and reboot the board:

   [Debug]
   
   aie_profile = true
   
   [AIE_profile_settings]
   
   interval_us = 1000
   graph_based_aie_metrics = all:all:execution
   tile_based_aie_memory_metrics = all:dma_locks
   tile_based_interface_tile_metrics = all:output_throughputs:0
   

3. Move the obtained profile data in the directory, profile_2, in a local workspace.

4. Open the first profile run summary file in the Vitis Analyzer as explained in step 4.

5. Add the second profile run summary file to the existing run_summary file using the + option as shown below. Observe the combined metrics of first run with the heat_map, conflicts, and input_throughputs metrics and the second run with execution, dma_locks, and output_bandwidth metrics in the Vitis Analyzer.

6. Click % to toggle between the absolute and percentage values of the collected design metrics.

7. Click the column header to sort the data within those rows. Click once to display the selected row data in ascending order. Click twice to display the selected row data in descending order. Click three times to disable the sorting function.