Prepare for the Hardware Run - 2023.2 English

Vitis Tutorials: AI Engine (XD100)

Document ID
Release Date
2023.2 English

After the design is built, you are ready to run on the hardware board.

  • Flash the SD card with the built sd_card.img.

  • Plug the flashed SD card into the SD card slot of the VCK190 board.

  • Connect the USB type C cable to the board and computer that supports the serial port connection.

  • Set the serial port configuration with Speed=115200, Data=8 bit, Parity=none, Stop bits=1 bit, and flow control=none.

  • Power up the VCK190 board to see boot messages from the serial connection.