Diagnostic Signals - 4.1 English

10G/25G High Speed Ethernet Subsystem Product Guide (PG210)

Document ID
Release Date
4.1 English

There are many error indicators available to check for protocol violations. Read the description of each one to decide if it is useful for a particular debugging problem.

The following is a suggested debug sequence:

  1. Ensure that Word sync has been achieved.
  2. Make sure there are no descrambler state errors.
  3. Eliminate CRC32 errors, if any.
  4. Make sure that the protocol is being followed correctly.
  5. Ensure that there are no overflow or underflow conditions when packets are sent.