Simplex RX Mode - 3.1 English

UltraScale+ Devices Integrated 100G Ethernet Subsystem Product Guide (PG203)

Document ID
Release Date
3.1 English

In this mode of operation only the 100G Ethernet IP core receiver is enabled as shown in This Figure. Also only the packet monitor will be enabled for the reception of packets.

To enable this mode of operation, select Simplex RX mode from the Vivado IDE parameters. This Figure shows the simplex RX mode of operation.



Figure 5-6:      Simplex RX Mode of Operation

X-Ref Target - Figure 5-6