Completion Engine - 1.0 English

Versal ACAP DMA and Bridge Subsystem for PCI Express Product Guide (PG344)

Document ID
Release Date
1.0 English

The Completion Engine writes the C2H AXI4-Stream Completion (CMPT) in the CMPT queue. The user application sends a CMPT packet and other information, such as, but not limited to, CMPT QID, and CMPT_TYPE to the QDMA. The QDMA uses this information to process the CMPT packet. The QDMA can be instructed to write the CMPT packet unchanged in the CMPT queue. Alternatively, the user application can instruct the QDMA to insert certain fields, like error and color, in the CMPT packet before writing it into the CMPT queue. Additionally, using the CMPT interface signals, the user application instructs the QDMA to order the writing of the CMPT packet in a specific way, relative to traffic on the C2H data input. Although not a requirement, a CMPT is typically used with a C2H queue. In such a case, the CMPT is used to inform the SW that a certain number of C2H descriptors have been used up by the DMA of C2H data. This allows the SW to reclaim the C2H descriptors. A CMPT can also be used without a corresponding C2H DMA operation, in which case, it is known as Immediate Data.

The user-defined portion of the CMPT packet typically needs to specify the length of the data packet transferred and whether or not descriptors were consumed as a result of the data packet transfer. Immediate and marker type packets do not consume any descriptors. The exact contents of the user-defined data are up to the user to determine.