The Completion Timer engine supports the timer trigger mode in the Completion context. It supports 2048 queues, and each queue has its own timer. When the timer expires, a timer expire signal is sent to the Completion module. If multiple timers expire at the same time, they are sent out in a round robin manner.
Reference Timer
The reference timer is based on the timer tick. The register QDMA_C2H_INT
(0xB0C) defines the value of a timer tick. The 16 registers QDMA_C2H_TIMER_CNT
(0xA00-0xA3c) has the timer counts based on the timer tick. The
timer_idx in the Completion context is the index to the 16
QDMA_C2H_TIMER_CNT registers. Each queue can choose its own
timer_idx.