- Place 4.7 kΩ pull-up resistors at the far end of the serial clock lines
(LPD_I2Cx_SCL) and serial data lines (LPD_I2Cx_SDA) furthest from the Versal adaptive SoC.
- A level-shifter/repeater might be required depending on the
particular multiplexers used.
- Ensure VIH/VIL and
VOH/VOL levels are
met for both the Versal and I2C devices
-
Versal device
values can be found in the PSIO Levels section of the Versal
adaptive SoC data sheets.
- Be sure to choose the correct levels for the voltage
used (that is, LVCMOS18, LVCMOS33).