Additional Resources and Legal Notices - UG863

Versal Adaptive SoC PCB Design User Guide (UG863)

Document ID: UG863
Release Date: 2025-03-04
Revision: 1.9 English

Overview
Introduction to Versal Adaptive SoCs
Navigating Content by Design Process
PCB Design Features
Differences from Previous Generations
Power Distribution System in Versal Adaptive SoCs
Introduction
Versal Adaptive SoC Power Rails
Unused VCCO Banks and NC Pins
Power Management Scenarios
Recommended Decoupling Capacitor Quantities for Versal Devices
Decoupling Capacitor Methodology
Device Resource Utilization
Current Step Load Assumptions
Voltage Ripple Assumptions
Target Impedance
Planar Resistance Recommendations
PCB Routing for Remote Voltage Sense Lines
Purpose of Sense Lines
Limitations of Sense Lines
Adaptive SoCs with Dedicated Sense Pins
Adaptive SoCs without Dedicated Sense Pins
The Use of Routing Tunnels and Sense Lines
Routing Under Land-Side Capacitors
Noise Mitigation Strategies when Combining VCCINT and VCC_RAM
Self-Induced Noise
PCB Noise
PCB Guidelines for Memory Interfaces
Required Memory Routing Guidelines for All Interfaces
Reference Material Specifications
Adjusting for Different Stack-Ups
PCB Routing Guidelines for DDR5 Interfaces
Signals and Connections for DDR5 Interfaces
Physical Design Rules for DDR5 Signals
Timing Constraint Rules for DDR5 Signals
PCB Routing Guidelines for LPDDR5 Interfaces
Signals and Connections for LPDDR5 Interfaces
Physical Design Rules for LPDDR5 Signals
Timing Constraint Rules for LPDDR5 Signals
PCB Routing Guidelines for DDR4 Interfaces
Signals and Connections for DDR4 Interfaces
Clamshell Topology
Utilizing Address Mirroring to Ease Clamshell Routing
Physical Design Rules for DDR4 Signals
Routing Rule Changes for Thicker Printed Circuit Boards
Timing Constraint Rules for DDR4 Signals
PCB Routing Guidelines for LPDDR4/4x Interfaces
Signals and Connections for LPDDR4/4x Interfaces
Physical Design Rules for LPDDR4/4x Signals
Timing Constraint Rules for LPDDR4/4x Signals
PCB Routing Guidelines for RLDRAM3 Interfaces
Signals and Connections for RLDRAM3 Interfaces
Physical Design Rules for RLDRAM3 Signals
Timing Constraint Rules for RLDRAM3 Signals
PCB Routing Guidelines for QDR-IV Interfaces
Signals and Connections for QDR-IV Applications
Physical Design Rules for QDR-IV Signals
Timing Constraint Rules for QDR-IV Signals
PCB Routing Guidelines for HBM2e
PCB Guidelines for PS, PMC, MIPI, and GTY/GTYP Transceiver Interfaces
GTY/GTYP Transceiver Interfaces
PMC Dedicated Pins
CAN FD
Gigabit Ethernet MAC 10/100/1000 RGMII
I2C
MIPI C-PHY
MIPI D-PHY
Octal SPI
Quad SPI
SD/SDIO/eMMC
SelectMAP
SPI
Trace Port Interface Unit
Triple Time Counter
UART
USB 2.0
System Windowed Watchdog Timer
Migration between Versal Devices and Packages
Versal Adaptive SoC Migration Checklist
Footprint Compatibility between Packages
Differences in XPIO, HDIO, and Transceiver Count
Package Dimensions
VCCSDFEC Rail
Differences in Transceiver Counts
Differences in XPIO Performance
XPIO Bank Fabric Access Limitations
GTYP Transceiver Fabric Access Limitations
I/O Bank and GT Quad Number Differences
GT_RCAL and GT_RREF Differences
Decoupling Capacitors Guidelines
Package Flight Time Differences
Reserved Sense Lines
IO_VR_700, IO_VR_800 Pin Differences
Material Properties and Insertion Losses
Additional Resources and Legal Notices
Finding Additional Documentation
Support Resources
References
Revision History
Please Read: Important Legal Notices

Back to home page