Basic Tab - 3.0 English - PG194

The Basic tab options for the AXI Bridge mode (Functional Mode option) are shown in the following figure.

The options are defined as follows:

Device / Port Type

PCI Express Endpoint device or Root Port of PCI Express® Root complex can be selected.

Enable AXI Slave Interface

This interface is selected by default, user can de-select this interface.

Enable AXI Master Interface

This interface is selected by default, user can de-select this interface.

Data Protection

By default parity checking is disabled.

• When Check Parity is enabled, AXI Bridge checks for parity on the read data from the PCIe and generates parity for write data to the PCIe.
• When Propagate Parity is enabled, AXI Bridge propagates parity to the user AXI interface. The user is responsible for checking and generating parity on the user AXI interface.

MPSOC PL RootPort Solution

This option is valid only in AXI Bridge Root Port mode. Enabling this option sets the reset source as phy_ready and sets the interrupt mode to decode mode.

All other options are the same as those for the DMA Subsystem mode. For description of these options, see the Basic Tab options section in Chapter 4: Design Flow Steps in the DMA/Bridge Subsystem for PCI Express Product Guide (PG195).