The following table shows the new parameter added to the core in the current release.
| User Parameter Name | Display Name | New/ Change/Removed | Details | Default Value |
|---|---|---|---|---|
| device_port_type | Device/Port Type | Change | Removed the Legacy_PCI_Express_Endpoint_device option from available options. | PCI_Express_ Endpoint_ device |
| tandem_mode | Tandem Configuration or Dynamic Function eXchange | Removed | This parameter has been replaced by the mcap_enablement parameter | None |
| mcap_enablement | Tandem Configuration or Dynamic Function eXchange | New | This is the new parameter added for Tandem mode selection. The valid values are None, Tandem, and Tandem with Field Updates. | None |
| en_ext_startup | Use an external STARTUP primitive | Removed | This is replaced by the ext_startup_primitive parameter. | False |
| ext_startup_primitive | Use an external STARTUP primitive | New | When this parameter unselected the STARTUP block will be generated internal to the IP when Tandem modes are selected. | False |
| pf0_base_class_menu | Base Class Menu | Change | Changed the default value. | Memory Controller |
| pf0_sub_class_interface_menu | Subclass Interface Menu | Change | Changed the default value. | Other Memory Controller |
| enable_jtag_dbg | Enable JTAG Debugger | New | When checked, this option enables the JTAG Debugging option of the subcore. | Unchecked |
| en_dbg_descramble | Enable Descrambler for Gen3 mode | New | This option enables the Enable Descrambler for Gen3 Mode option of the subcore and is valid only for Gen3 speeds. | Unchecked |
| enable_ibert | Enable In system IBERT | New | This option enables the ‘In System IBERT’ feature of the subcore. | Unchecked |
| en_l23_entry | Support PM_L23 Entry | New | When checked, supports PM_L23 Entry, and the PM_ENABLE_L23_ENTRY attribute will be set to TRUE. | Unchecked |