Debug Register Access Status Register (DBG_STATUS) - 3.2 English - PG115

MicroBlaze Debug Module LogiCORE IP Product Guide (PG115)
Document ID
PG115
Release Date
2021-01-21
Version
3.2 English

The status register contains the status of the access lock. This is a read only register. Bit assignment in the register is described in the following tables. The register is only implemented if C_DBG_REG_ACCESS is set to 1.

Table 1. Debug Register Access Status Register (DBG_STATUS)
Reserved LOCK
31 1 0
Table 2. Debug Register Access Status Register Bit Definitions
Bits Name Access Reset Value Description
31-1 Reserved N/A 0 Reserved
0 Access Lock R 0 Indicates the access lock status.

0 = The lock is not acquired

1 = The lock has been acquired by the JTAG interface