The quality of service (QoS) report in AMD Vivado™ compares the estimated QoS from the current network on chip (NoC) solution, generated by the NoC compiler, to the QoS requirements specified in the AXI NoC IP and AXI4-Stream NoC IP.
If the NoC solution becomes out-of-date, run the NoC compiler to regenerate the solution and update the QoS report. An out-of-date report displays a banner message indicating the status.
Figure 1. Out-of-Date Vivado NoC QoS Report
Selecting Update regenerates the NoC solution.
Note: In IP integrator, use the
validate_bd_design Tcl command to update the NoC solution.
Use the update_noc_qos Tcl command in the implementation
tools or flows.Actions That Can Cause the NoC Solution to Become Out-of-Date
- In the IP integrator:
- Updating the AXI NoC IP QoS requirements in the IP integrator
- Changing the IP integrator block design
- Modifying the NoC master unit (NMU) or NoC slave unit (NSU) assignments in the NoC view
- In implementation tools or flow:
- Unplacing NMU or NSU instances
- Adding XDC physical constraints that impact NMU or NSU placement
- Changing logical net connections to NMU or NSU