When selecting the -slr option, the generated
report shows the SLR related utilization. The SLR utilization tables include the following four
tables:
- SLR Connectivity
- SLR Connectivity Matrix
- SLR CLB Logic and Dedicated Block Utilization
- SLR IO Utilization
These tables are also shown by default when running report_utilization. The SLR connectivity table shows the LAGUNA registers used for both TX
and RX directions on each SLR side.
Figure 1. SLR Connectivity Report in GUI
The total used LAGUNA registers are also reported in the ADVANCED table for both directions.
Figure 2. LAGUNA Register Report in GUI
The SLR CLB Logic and Dedicated Block Utilization table shows the resource utilization for each SLR.
Figure 3. Utilization in Each SLR
