Setting the FMC Voltage to 1.8V - 2.1 English

DisplayPort RX Subsystem LogiCORE IP Product Guide (PG233)
Document ID
PG233
Release Date
2023-05-25
Version
2.1 English

To run the example design on the ZCU102 board, ensure that the FMC voltage is set to 1.8V. To set the FMC VADJ voltage:

  1. Connect the ZCU102 board from the host PC to the USB UART port and power up the board.
  2. Open the ZCU102 SCUI tool and select the FMC tab. On the Set VADJ tab, select the Set VADJ to 1.8V.
    Figure 1. ZCU102 SCUI