Hierarchical sets are collections of logic elements based on the hierarchy of the design as defined by the HDL source files. H_SET, HU_SET, and U_SET are attributes within the HDL design source files, and do not appear in the synthesized or implemented design. They are used when defining Relatively Placed Macros, or RPMs in the RTL design. For more information on using these properties, and defining RPMs, refer to the Vivado Design Suite User Guide: Using Constraints (UG903) [Ref 19].
H_SET is a property that is implied due to the presence of RLOC properties on logic cells in the hierarchy of a design. Logic elements inside of a hierarchical block, that have the RLOC property, are automatically assigned to the same Hierarchical Set, or H_SET.
Each hierarchical module is assigned an H_SET property based on the instance name of the module. Each hierarchical module can only have a single H_SET name, and all logic elements inside that hierarchy are elements of that H_SET.
Note: H_SET is only defined if there is no HU_SET or U_SET defined, but RLOC is defined.
You can also manually create a User-defined Hierarchical Set, or HU_SET, or a User-defined Set, or U_SET, that is not dependant on the hierarchy of the design.
You can define multiple HU_SET names for a single hierarchical module, and assign specific instances of that hierarchy to the HU_SET. This allows you to divide the logic elements of a single hierarchical module into multiple HU_SETs.
IMPORTANT: When using H_SET or HU_SET, the KEEP_HIERARCHY property is also required for Vivado Synthesis to preserve the hierarchy for the RPM in the synthesized design.
When RLOC is also present in the RTL source files, the H_SET, HU_SET, and U_SET properties get translated to a read-only RPM property on cells in the synthesized netlist. The HU_SET and U_SET are visible on the RTL source file in the Text editor in the Vivado Design Suite. However, in the Properties window of a cell object, the RPM property is displayed.
Architecture Support
All architectures.
Applicable Objects
The HU_SET property can be used in one or more of the following design elements, or categories of design elements. Refer to the Vivado Design Suite 7 Series FPGA and Zynq-7000 SoC Libraries Guide (UG953) [Ref 25] or the UltraScale Architecture Libraries Guide (UG974) [Ref 26] for more information on the specific design elements:
•Registers
•LUT
•Macro Instance
•RAMS
•RAMD
•RAMB18/FIFO18
•RAMB36/FIFO36
•DSP48
Values
•<NAME>: A unique name for the HU_SET.
Syntax
Verilog Syntax
This is a Verilog attribute used in combination with the RLOC property to define the set content of a hierarchical block that will define an RPM in the synthesized netlist. Place the Verilog attribute immediately before the instantiation of a logic element.
(* RLOC = "X0Y0", HU_SET = "h0" *) FD sr0 (.C(clk), .D(sr_1n), .Q(sr_0));
Verilog Example
The following Verilog module defines RLOC and HU_SET properties for the shift register Flops in the module.
module ffs (
input clk,
input d,
output q
);
wire sr_0, sr_0n;
wire sr_1, sr_1n;
wire sr_2, sr_2n;
wire sr_3, sr_3n;
wire sr_4, sr_4n;
wire sr_5, sr_5n;
wire sr_6, sr_6n;
wire sr_7, sr_7n;
wire inr, inrn, outr;
inv i0 (sr_0, sr_0n);
inv i1 (sr_1, sr_1n);
inv i2 (sr_2, sr_2n);
inv i3 (sr_3, sr_3n);
inv i4 (sr_4, sr_4n);
inv i5 (sr_5, sr_5n);
inv i6 (sr_6, sr_6n);
inv i7 (sr_7, sr_7n);
inv i8 (inr, inrn);
(* RLOC = "X0Y0", HU_SET = "h0" *) FD sr0 (.C(clk), .D(sr_1n), .Q(sr_0));
(* RLOC = "X0Y0", HU_SET = "h0" *) FD sr1 (.C(clk), .D(sr_2n), .Q(sr_1));
(* RLOC = "X0Y1", HU_SET = "h0" *) FD sr2 (.C(clk), .D(sr_3n), .Q(sr_2));
(* RLOC = "X0Y1", HU_SET = "h0" *) FD sr3 (.C(clk), .D(sr_4n), .Q(sr_3));
(* RLOC = "X0Y0", HU_SET = "h1" *) FD sr4 (.C(clk), .D(sr_5n), .Q(sr_4));
(* RLOC = "X0Y0", HU_SET = "h1" *) FD sr5 (.C(clk), .D(sr_6n), .Q(sr_5));
(* RLOC = "X0Y1", HU_SET = "h1" *) FD sr6 (.C(clk), .D(sr_7n), .Q(sr_6));
(* RLOC = "X0Y1", HU_SET = "h1" *) FD sr7 (.C(clk), .D(inrn), .Q(sr_7));
(* LOC = "SLICE_X0Y0" *) FD inq (.C(clk), .D(d), .Q(inr));
FD outq (.C(clk), .D(sr_0n), .Q(outr));
assign q = outr;
endmodule // ffs
In the preceding example, you will need to specify the KEEP_HIERARCHY property to instances of the ffs module to preserve the hierarchy and define the RPM in the synthesized design:
module top (
input clk,
input d,
output q
);
wire c1, c2;
(* KEEP_HIERARCHY = "YES" *) ffs u0 (clk, d, c1);
(* KEEP_HIERARCHY = "YES" *) ffs u1 (clk, c1, c2);
(* KEEP_HIERARCHY = "YES" *) ffs u2 (clk, c2, q);
endmodule // top
VHDL Syntax
Declare the VHDL attribute as follows:
attribute HU_SET : string;
Specify the VHDL constraint as follows:
attribute HU_SET of {component_name | entity_name | label_name} : {component|entity|label} is "NAME";
Where:
•{component_name | entity_name | label_name} is the design element.
•{component|entity|label} is the instance ID of the design element.
•"NAME" is the unique set name to give to the HU_SET.
XDC Syntax
The HU_SET property can not be defined using XDC constraints. The HU_SET property, when present on logic elements with the RLOC property, defines relatively placed macros (RPMs), and results in the read-only RPM property in the netlist of synthesized designs.
TIP: You can use the create_macro and update_macro commands to define macro objects in the Vivado Design Suite, that act like RPMs within the design. Refer to the Vivado Design Suite Tcl Command Reference Guide (UG835) [Ref 13] for more information on these commands.
Affected Steps
•Design Floorplanning
•Place Design
•Synthesis
See Also