This section includes information about using AMD tools to customize and generate the subsystem in the AMD Vivado™ Design Suite.
If you are customizing and generating
the subsystem in the
Vivado IP integrator, see
the
Vivado Design Suite User Guide: Designing
IP Subsystems using IP Integrator (UG994) for
detailed information. IP integrator might auto-compute certain
configuration values when validating or generating the design. To
check whether the values do change, see the description of the
parameter in this chapter. To view the parameter value, run the
validate_bd_design
command in the Tcl
console.
You can customize the IP for use in your design by specifying values for the various parameters associated with the IP subsystem using the following steps:
- Select the IP from the IP catalog.
- Double-click the selected IP or select the Customize IP command from the toolbar or right-click menu.
For details, see the Vivado Design Suite User Guide: Designing with IP (UG896) and the Vivado Design Suite User Guide: Getting Started (UG910).
Figures in this chapter are illustrations of the Vivado IDE. The layout depicted here might vary from the current version.
The subsystem configuration screen is shown in the following figure.
- Component Name
- The Component Name is used as the name of the top-level wrapper file for
the subsystem. The underlying netlist still retains its original name. Names must begin
with a letter and must be composed of the following characters: a through z, 0 through 9,
and "_." The default is
mipi_dsi_tx_subsystem_0
.