BLLP Time - 2.3 English

MIPI DSI Transmitter Subsystem LogiCORE IP Product Guide (PG238)

Document ID
Release Date
2.3 English

Total BLLP time is calculated by the core (in bytes) based on timing parameters programmed and non-burst/burst mode selection. This duration refers to BLLP regions defined in VSA, VBP, VACT, and VFP lines of video timing.

This BLLP duration is used to byte the core to accommodate command queue packets, as shown in the following table.

Table 1. Video Timing (BLLP Time) (0x64)
Bits Name Reset Value Access Description
31:0 BLLP Time 0x0 R BLLP duration in bytes (Value is valid only when all the required timing registers are programmed)